Tile / Flooring Calculator

Runs on your device Processed locally in your browser. Nothing is uploaded.

Tiles and boxes to buy for a floor or wall, with deductions, wastage allowance and box packing.

Areas & Tile Specification

Area schedule

AreaLengthWidth / heightExclusion m²Qty

Tile, pattern & purchase

Cost Estimate Optional · edit rates

Your entered rates only. Zero rates add no cost. Currency changes the label; amounts are not converted. No live prices or FX.

Line amounts round to 2 decimal places; the total sums those lines. Cost uses calculated quantities before display rounding.

Grout, adhesive, spares & underlayment

Grout, adhesive, spares & underlayment

Pattern changes the illustrative grid; you enter the cutting allowance. No cut-reuse or global material optimum is claimed.

Custom polygon, borders & orientation

Custom polygon, borders & orientation

Custom Shape accepts a measured area or a simple polygon below. Borders report area separately; a different border tile must be ordered as a separate material.

Leave empty to use measured net area. Polygon must be simple and non-intersecting.

Floor finish & layout preview

Illustrative material view
Realistic tile / flooring material illustration; geometry is illustrative

Results Summary

Calculated

Calculation Details

Important Notes / Warnings

Area-based purchasing with explicit cuts/spares. The preview is not a certified installation or optimized cutting plan. Artwork is illustrative. This is an independent reference prototype, not a production engine or certified engineering design.

Tool information

Disclaimer

Results are provided for guidance. Check them against the applicable rules and your professional judgement before relying on them.

How to use

This tile calculator works out how many tiles and boxes to buy for a floor or wall — a practical flooring calculator for homeowners, contractors, and quantity surveyors planning a tiling job.

  1. Enter the surface as length × width, or switch to Known area if you already have the area. Changing a unit converts the values you already typed.
  2. Enter the number of same-size areas, and add any parts that will not be tiled.
  3. Enter one tile's face size in the tile unit — the surface and the tile can use different units.
  4. Pick a layout to suggest a wastage percentage, or type your own. The suggestions are estimating guidance only.
  5. Enter the box packing from the label — tiles per box or coverage per box — or skip boxes.
  6. Choose 2, 3 or 4 decimal places for decimal inputs and results, then read the whole tiles and boxes to buy, the calculated count before wastage, assumptions and working. Copy or print the result.

Method

  • Gross area = length × width (or the known area) × number of rooms.
  • Deductions = Σ(width × height × quantity), from each room. Deductions that equal or exceed the area are rejected.
  • Tile area = tile length × tile width (the tile's face).
  • Calculated tiles = net area ÷ tile area.
  • Tiles to buy = calculated tiles × (1 + wastage % ÷ 100), rounded up once to a whole tile.
  • Boxes = tiles to buy ÷ tiles per box, or net area × (1 + wastage % ÷ 100) ÷ coverage per box, rounded up to a whole box.

Unit conversions are exact (1 inch = 25.4 mm, 1 foot = 0.3048 m, 1 ft² = 0.09290304 m²). The wastage allowance is applied to the exact calculated count and the result is rounded only once, so the order never carries a hidden double rounding. Calculations keep full internal precision; the decimal-place control changes only accepted wastage precision and decimal result presentation. Whole tiles and boxes remain whole numbers.

Why grout joints are not deducted. A simple "tile + joint" formula does not reliably predict how many tiles a real layout uses — cuts at the edges usually matter more. The calculator uses tile face area and lets your wastage allowance cover cuts and breakage.

This calculator gives tile and box quantities only. It does not calculate grout or adhesive, skirting, layout-specific cuts, material or labour cost, or a bill of quantities (BOQ).

Worked example

A 5 × 4 m room, 300 × 300 mm tiles, 10% wastage, 10 tiles per box:

Input
Surface size Length × width
Surface unit m
Floor or wall length 5
Floor width or wall height 4
Same-size areas 1
Tile unit mm
Tile length 300
Tile width 300
Wastage allowance % 10%
Box packing Tiles per box
Tiles per box (optional) 10
Result
Tiles to buy (rounded up) 245
Boxes to buy (rounded up) 25
Calculated tiles before wastage 222.22
Wastage allowance 10%
Wastage allowance (tiles) 22.22
Net tiled area (m²) 20.00
Gross area (m²) 20.00
Areas deducted (m²) 0.00

References

  • Rectangular area and tile-count ratio: net area ÷ tile face area (general geometry).
  • International yard and pound agreement (1959): 1 inch = 25.4 mm and 1 foot = 304.8 mm exactly.

FAQ

How do I calculate how many tiles I need?

Enter the floor or wall size and one tile's size. The calculator divides the net area by the tile's face area, adds your wastage allowance and rounds up to a whole tile.

How much wastage should I add for tiles?

It depends on the layout, the room shape and the tile size. The layout picker suggests 10% for a straight lay, 15% for diagonal and 20% for herringbone or complex patterns — as starting points you can change, not standards.

Can I use feet for the room and inches for the tile?

Yes. The surface and the tile each have their own unit.

How do I calculate boxes of tiles?

Enter either the tiles per box or the area one box covers, from the box label. Boxes are rounded up to whole boxes.

Does this include grout or adhesive?

No. This calculator estimates tiles and boxes only.

Is the result an estimate?

Yes. This is an estimation aid for planning and quantity checks, not a final billing quantity. Actual tile usage can vary due to cutting at edges and corners, breakage, pattern layout, and grout width — verify tile sizes, room dimensions, and wastage before purchase or installation.