Paint Calculator

Runs on your device Processed locally in your browser. Nothing is uploaded.

Paint needed for a room, surface or pitched roof, with openings deducted, coats, coverage and wastage.

Surfaces & Paint Specification

Paint product & application

Openings / deductions

TypeWidthHeightQty
Cost Estimate Optional · edit rates

Your entered rates only. Zero rates add no cost. Currency changes the label; amounts are not converted. No live prices or FX.

Line amounts round to 2 decimal places; the total sums those lines. Cost uses calculated quantities before display rounding.

Primer, surface condition & purchase packs

Primer, surface condition & purchase packs

Coverage is user/product specific. Surface condition is recorded, never a hidden universal multiplier. Do not multiply a quoted two-coat system yield by two.

Multiple rooms & measured surfaces

Multiple rooms & measured surfaces

Additional rooms have their own lengths, widths, heights and opening deductions. They use the selected product/coat basis; do not combine different paint systems in one quantity.

Additional rooms

RoomLengthWidthHeightOpening m²

Selected paint surfaces

Illustrative material view
Realistic paint material illustration; geometry is illustrative

Results Summary

Calculated

Calculation Details

Important Notes / Warnings

Confirm product-specific coverage, substrate preparation and coat requirements. Primer is a separate product quantity. Artwork is illustrative. This is an independent reference prototype, not a production engine or certified engineering design.

Tool information

Disclaimer

Results are provided for guidance. Check them against the applicable rules and your professional judgement before relying on them.

How to use

This paint calculator works out how much paint you need for a room, a single wall or flat surface, or a rectangular roof with one uniform pitch.

  1. Choose Room walls, Single surface, or Roof. Roof mode uses the rectangular plan length, plan width and one uniform pitch angle.
  2. Choose the unit your measurements are in. Changing the unit converts the values you already typed.
  3. Add each door, window or other unpainted area with its width, height and quantity.
  4. Enter the number of coats and your paint's coverage per coat, in m²/L or ft²/US gal — use the figure on your paint's label.
  5. Set a wastage allowance (defaults to 10%), display precision and, optionally, the container size.
  6. Read the paint to buy, the calculated paint before wastage, the areas, the assumptions used and the working. Copy or print the result.

Method

  • Room walls: gross area = 2 × (length + width) × wall height, plus length × width if the ceiling is included, × the number of identical rooms.
  • Single surface: gross area = length × height or width, × the number of identical surfaces.
  • Roof: surface area = length × width ÷ cos(pitch angle), × the number of same-size roofs. A 0° pitch gives the plan area; pitch must be from 0° to 89°.
  • Openings = Σ(width × height × quantity), deducted from each room, surface or roof. Openings that equal or exceed the gross area are rejected, since nothing would be left to paint.
  • Paint = net area × number of coats ÷ coverage per coat.
  • Paint to buy = paint × (1 + wastage % ÷ 100). Containers, when you enter a size, are rounded up to whole containers.

Coverage is converted exactly between m²/L and ft²/US gal (1 ft² = 0.09290304 m², 1 US gallon = 3.785411784 L), and lengths use 1 inch = 0.0254 m and 1 foot = 0.3048 m. Area and paint calculations keep full internal precision; choose 2, 3 or 4 decimal places for display.

Coverage is an estimate you control. 10 m²/L is only a starting value; real coverage depends on the product, the surface's texture and porosity, the colour change and how it is applied. The coverage used is always listed with the result.

This calculator estimates finish paint only. It does not calculate primer, putty, labour, cost, colour matching, or a bill of quantities (BOQ), and it never assumes a brand's tin size.

Worked example

A 4 × 3 m room with 2.7 m walls, one 0.9 × 2.1 m door and one 1.5 × 1.2 m window, 2 coats, 10 m²/L coverage and a 10% wastage allowance:

Input
What are you painting? Room walls
Unit m
Room length 4
Room width 3
Wall height 2.7
Also paint the ceiling false
Same-size areas 1
Coats 2
Wastage % 10%
Coverage / coat 10
Coverage unit m²/L
Result
Paint to buy incl. wastage (L) 7.50
Paint to buy incl. wastage (US gal) 1.98
Calculated paint before wastage (L) 6.82
Wastage allowance 10%
Coats 2
Net paintable area (m²) 34.11
Gross / roof surface area (m²) 37.80
Openings deducted (m²) 3.69

References

  • Rectangular area and paint coverage: (area − openings) × coats ÷ coverage (general geometry).
  • Uniformly pitched rectangular roof surface: plan area ÷ cos(pitch angle) (right-triangle geometry).
  • International yard and pound agreement (1959): 1 inch = 25.4 mm and 1 foot = 304.8 mm exactly; US liquid gallon = 3.785411784 L exactly.

FAQ

How do I calculate how much paint I need for a room?

Choose "Room walls", enter the room's length, width and wall height, add the doors and windows, then the number of coats and your paint's coverage. Wall area is the room's perimeter × height, less the openings.

Should the ceiling be included?

Only if you are painting it with the same paint. Tick "Also paint the ceiling" to add length × width to the area.

What coverage rate should I use?

The one stated on your paint's label or data sheet, for the surface you are painting. Rough, porous or unpainted surfaces usually need more paint than the label's best-case figure.

How does Roof mode handle pitch?

It divides the rectangular plan area by the cosine of the pitch angle. It assumes one uniform pitch across the whole roof; enter separate calculations for roof sections with different pitches.

Does this include primer?

No. Primer usually has its own coverage and number of coats, so it is not estimated from the finish paint's figures.

How much wastage should I add for paint?

10% is a common starting allowance and this calculator's default; change it to suit your job.

Is the result an estimate?

Yes. This is an estimation aid for planning and quantity checks, not a final billing quantity. Actual paint usage may vary due to surface texture and porosity, application method, paint brand and type, and site conditions — verify surface area, coats, coverage, and wastage before purchase or application.

Does this use AI?

No. This tool is a deterministic calculator — the same inputs always give the same result.