Plaster Calculator

Runs on your device Processed locally in your browser. Nothing is uploaded.

Plaster area and volume for a wall, ceiling or surface, with openings, wastage and optional product-based bags.

Surfaces & Plaster Specification

Plaster specification

Openings / deductions

TypeWidthHeightQty
Cost Estimate Optional · edit rates

Your entered rates only. Zero rates add no cost. Currency changes the label; amounts are not converted. No live prices or FX.

Line amounts round to 2 decimal places; the total sums those lines. Cost uses calculated quantities before display rounding.

Multiple layers, bags & measured returns

Multiple layers, bags & measured returns

Each layer uses its own thickness and mix. First-layer and second-layer mortar are not silently treated as the same ratio.

Multiple surfaces & ceiling deductions

Multiple surfaces & ceiling deductions

Add surfaces below with their own lengths, heights and deductions. Ceiling openings/exclusions should be separately measured.

Additional surfaces

SurfaceLengthHeightFacesDeduction m²

Wall section & plaster layers

Illustrative material view
Realistic plaster material illustration; geometry is illustrative

Results Summary

Calculated

Calculation Details

Important Notes / Warnings

Cement–sand estimating basis only. Gypsum and proprietary premix need their own product-yield data. Artwork is illustrative. This is an independent reference prototype, not a production engine or certified engineering design.

Tool information

Disclaimer

Results are provided for guidance. Check them against the applicable rules and your professional judgement before relying on them.

How to use

This plaster calculator works out the plaster area and application volume for a wall, ceiling, or general rectangular surface — a practical plaster quantity calculator for site engineers, contractors, masons, and quantity surveyors.

  1. Choose the surface type and the unit your dimensions are in. Changing a unit converts the values you already typed.
  2. Enter the surface's length and height or width, and the number of same-size surfaces.
  3. Add each door, window or other unplastered area with its width, height and quantity.
  4. Enter the plaster thickness (in mm or inches) and a wastage allowance.
  5. To also estimate bags, choose a material estimate and enter the yield or coverage printed on your plaster product.
  6. Choose 2, 3 or 4 decimal places for decimal inputs and results, then read the plaster volume, net area, bags when you supplied product data, assumptions and working. Copy or print the result.

Method

  • Gross area = length × height or width × number of surfaces.
  • Openings = Σ(width × height × quantity), deducted from each surface. Openings that equal or exceed the surface are rejected.
  • Application (wet) volume = net area × thickness.
  • Volume including wastage = application volume × (1 + wastage % ÷ 100).
  • Bags, from your product's yield = volume including wastage ÷ yield per bag, rounded up.
  • Bags, from your product's coverage = volume including wastage ÷ (coverage per bag × the thickness that coverage is quoted for), rounded up — so a thicker coat correctly needs more bags.

Unit conversions are exact (1 inch = 25.4 mm, 1 foot = 0.3048 m, 1 ft² = 0.09290304 m², 1 ft³ = 0.028316846592 m³). Calculations keep full internal precision; the decimal-place control changes only accepted wastage precision and decimal result presentation. Whole bags remain whole numbers.

Why no universal bag figure? Cement-sand render, gypsum plaster, skim coats and ready-mixed bagged plaster have different densities, yields and water demand. Rather than assume one density or bag size for all of them, this calculator estimates bags only from the yield or coverage your own product states.

This calculator does not calculate a cement/sand material breakup, a mix ratio, water quantity, labour, scaffolding, curing, a bill of quantities (BOQ), or a final billing quantity.

Worked example

A 4 × 3 m wall with one 1 × 2 m door, 12 mm plaster, no wastage, volume only:

Input
Surface type Wall
Surface unit m
Length 4
Height or width 3
Same-size surfaces 1
Wastage allowance % 0%
Thickness unit mm
Plaster thickness 12
Material estimate Volume only (no bag estimate)
Result
Plaster volume incl. wastage (m³) 0.120
Plaster volume incl. wastage (ft³) 4.24
Plaster volume incl. wastage (L) 120.00
Application (wet) volume before wastage (m³) 0.120
Wastage allowance 0%
Net plaster area (m²) 10.00
Thickness used (in the thickness unit) 12
Gross area (m²) 12.00
Openings deducted (m²) 2.00

References

  • Rectangular area and volume: length × width × thickness (SI, general geometry).
  • International yard and pound agreement (1959): 1 inch = 25.4 mm and 1 foot = 304.8 mm exactly.

FAQ

How do I calculate plaster quantity?

Enter the surface size, the openings and the plaster thickness. The calculator multiplies the net area by the thickness to give the application volume, then adds your wastage allowance.

How many bags of plaster do I need?

Choose a bag estimate and enter the figure from your product — either the wet yield per bag, or the area one bag covers and the thickness that coverage is quoted for. The calculator rounds up to whole bags.

Why doesn't it calculate cement and sand?

The split depends on the mix, the dry-volume allowance and site practice, and these vary. This tool keeps to the geometric plaster volume and product-stated bag yields rather than presenting a disputed factor as fact.

What plaster thickness should I enter?

Your project's specified average thickness. 12 mm is only a starting value — internal and external work, and different plaster systems, use different thicknesses.

Should I deduct doors and windows?

Yes. Add each one as an opening row; the total is deducted from every identical surface.

Can I use this for final billing?

No. This is an estimation aid for planning and quantity checks, not a final billing quantity or a certified bill of quantities. Actual plaster quantity can vary due to wall unevenness, surface preparation, thickness variation, site cutting, and measurement rules — verify plaster thickness, surface dimensions, openings, and wastage before purchase, billing, or construction.